Categories
News

Do it yourself paver patio install?

Do It Yourself Paver Patio Install?

Building a paver patio is one of the most valuable home improvement projects you can undertake.

A paver patio not only provides a great place to unwind but it also adds extra value to your home. 

If you’re considering building a paver patio in your home, you may be wondering what steps you’ll need to follow to complete the project.

Below Is an 8- Step Guide to Installing DIY Paver Patio

Step 1: Planning and Layout

The first step is to create an outline of the area where you want to install the pavers on graph paper. This will help you calculate the number of pavers needed to complete the project. 

Keep in mind that the area needs to have a gradient to allow water to run off the pavers. 

Step 2: Excavation

The second step is to calculate the total depth of excavation needed and dig out the area where the pavers will be installed. Remember the slope should be at least one inch for every eight feet of the paver patio. 

Once you’ve dug out the indicated depth, compact the ground with a compacting machine. 

Step 3: Base Material

Lay out the base material to a thickness suitable for the planned use. Typically, crushed gravel is used as the base material for paver patio installation. It’s recommended that the base material is divided into three layers and use a plate compactor to compact the layers properly.   

Step 4: Edge Restraints

The next step is to install edge restraints that will prevent the pavers from moving and separating. 

Step 5: Sand Bedding

Lay out a layer of bedding sand over the compacted base material. This layer should be between 1 and 1.5 inches thick. 

Step 6: Laying Pavers

Lay the pavers in the pattern and design that you’ve planned for and use a mechanical plate compactor to set the pavers into the sand bedding.

Step 7: Sand Joints

Sweep fine-grained sand over the pavers so as to fill up the joints and lock the pavers into place.

Step 8: Sealing

Sweep the newly paved patio and seal the area with a good sealant. Sealing your paver patio will prevent the growth of vegetation/weeds between the joints and prevent stains. 

How Long Does It Take to Install A DIY Paver Patio? 

It will take only one day to install pavers on a small patio but a paving a larger patio can take up to five days.

Bottom Line

A properly installed paver patio can extend your living space and make your home seem bigger, provide a great entertainment spot, and add value to your home.

While DIY paver patio installation can save you money, you should only consider going the DIY route if you know what you’re doing. You should never undertake paver patio installation using trial and error because you’ll end up doing a shoddy job that needs to be redone. 

If you need help with paver patio installation in your home, get in touch with a licensed and experienced contractor.

Categories
News

Is it cheaper to lay concrete or pavers?

Is It Cheaper to Lay Concrete or Pavers?

Your outdoor living area can make or break the first impression of your home. For that reason, your hardscapes and landscapes must stand out to create a good first impression with guests, neighbors, home buyers, and people who drive by your property.

If you’re considering installing or replacing a driveway, walkway, patio, or pool deck, you may be spoilt for choice when it comes to selecting the materials to use.

Concrete and pavers are both good choices for driveways, walkways, pool decks, and patios. However, the two materials differ in terms of installation costs, durability, design options, repair costs, maintenance, and safety. 

In this article, we will compare concrete vs pavers in terms of installation costs to help you make the right decision. 

We will also walk you through the basic differences between concrete and pavers to help you decide which is the best for you.

Concrete Vs Pavers

Concrete can be poured on site and left to cure or come in prefabricated slabs that mimic pavers. 

Concrete slabs can be plain smooth, stamped, stained or colored. With modern techniques like concrete stamping and stenciling, the design options for concrete can be even more diverse.

Concrete slabs are easy to install, simple to maintain, and come with a lower upfront cost.

Pavers are made from a wide variety of materials such as concrete, clay brick, natural stone, marble, and even porcelain.

Pavers are not poured like slabs; they arrive ready to install and are laid by hand individually. They come in many different shapes, sizes, and colors.

The main advantages of pavers include superior strength and longevity, better appearance, and improved safety because they are skid-resistant. 

Concrete Vs Pavers: Installation Costs

The upfront cost of pavers is about 10 to 15 percent more than concrete slabs. The upfront cost of pavers can run anywhere from $23 to $27 per square foot.

However, luxury paver materials can cost up to $35 per square foot and complex designs will cost more. 

A basic smooth finish concrete installation is cheaper than pavers because the job doesn’t take much time when compared to installing pavers by hand individually.

However, a stamped concrete installation that bears the resemblance of natural stone, brick or marble can match or even exceed the cost of pavers. 

Installing pavers requires a lot more preparation, which makes for a more time and labor-intensive installation.

For a 1,000 square foot paver installation, you should expect to pay an average of $23,500. On the other hand, a simple concrete slab installation without stamping or texturing can cost an average of $14,000 for a 1,000-square-foot installation.

Bottom Line

If your choice between concrete and pavers comes down to cost, concrete is a cheaper option. However, both materials can be about the same price when compared to decorative concrete installation. 

Whichever option you think is best for your outdoor living area, it’s advisable to compare quotes from several contractors to get the best deal.

Categories
News

Yard Drainage

If your yard is constantly wet or flooded, you may need to install a drainage system. There are many different types of drainage systems available, so it’s important to choose one that will work best for your particular situation. A professional landscaper can help you determine which type of system would be most effective for your needs.

Installing a drainage system can be a big job, so it’s important to make sure that you hire a reputable contractor who has experience installing this type of system. Once the system is installed, you’ll need to maintain it by regularly cleaning out the drains and making sure that they are clear of debris. With proper care, your drainage system should last for decades.

If you’re tired of dealing with a wet yard, installing a drainage system may be the best solution. With proper planning and installation, you can enjoy a dry yard for years to come.

What are some of the benefits of having a drainage system installed in your yard?

Drainage systems can help to:

– reduce flooding

– prevent water damage to your home

– protect your foundation from water damage

– reduce soil erosion

– improve the appearance of your yard by eliminating puddles and mud patches.

If you’re considering having a drainage system installed in your yard, be sure to consult with a professional landscaper to get the best results. With proper installation and maintenance, a drainage system can be a great way to improve the function and appearance of your yard.

What are some of the drawbacks of having a drainage system installed in your yard?

Drainage systems can also:

– cause problems with landscaping if not installed properly

– expensive to maintain if not installed properly.

If you’re considering having a drainage system installed in your yard, weigh the pros and cons carefully before making a decision. A professional landscaper can help you determine whether a drainage system is right for your situation. With proper installation and maintenance, a drainage system can be a great way to improve the function and appearance of your yard. However, there are also some potential drawbacks that you should be aware of before making a final decision.

I hope this has helped you to understand a little more about yard drainage systems. If you have any further questions, please don’t hesitate to contact us at 215-645-4655 to answer any questions you may have.

Categories
News

How to Build a Round Patio with a Fire Pit: The Ultimate Guide

Categories
News

How To Clean My Patio?

How to Clean my Patio?

Your patio must always be kept tidy, just as you take time while vacuuming floors and dusting your furniture. The reason behind cleaning your patio is to ensure it’s ready for any party that might come up and creates a conducive environment around you. All these maintenance and cleaning activities can be well performed during the spring season. You can book your kids, spouse, and relatives to engage in the activity and pull a party for them as a reward.

Cleaning Your Patio Furniture 

While planning to clean the patio, you need to first remove all the equipment, furniture, accessories, and plant containers. All the cushions and furniture frames need to be washed using soap and clean water. To ensure that mildew does not grow on the furniture, ensure that the cushions are well dried before taking them back on the furniture.

Use auto polish on metal frames to make them shine.

For the tabletops made up of glass, use glass cleaner; your outdoor lanterns on the glass windows should be cleaned to allow light to pass through well.

The grill gates and steel grills should be cleaned using a degreaser.

Use soap and water to clean the umbrella fabric while the moving parts of the umbrella are supposed to be cleaned using some oil.

If you have some old potting soil, ensure you remove and dispose the soil. Clean all the pots using a mixture of bleach and water. The mixture will help kill any bacteria that might have developed in the pots. Once the pots dry, you can fill them with new soil and put your plants back.

Cleaning concrete patios

  • First, sweep the entire patio.
  • Use a hose pipe with a nozzle that can provide you with a water flow with strong pressure.
  • Use a natural scrub brush to remove the stains on the patio and degreaser to clean any oil spots. Avoid using a wire brush as it can create rust stains or lead to scratches on the concrete.
  • If you have not been cleaning your concrete patio for a longer time, you can apply a solution of both Dawn or Ajax dishwashing and water to ensure that your patio shines well.
  • If you have a discolored patio, it will be appropriate to call a professional cleaner. The professional will use a solution of muriatic acid to clean your patio. The acid is dangerous to pants, gloves, and shoes; hence should be handled with care.

Cleaning natural stone patio

  • Use a hosepipe to wash the patio while applying detergents like Dawn or Ajax dishwashing liquid.
  • If your patio has some black spots, use bleach and water to remove those spots. It will also help in driving away any mildew on the patio.

Cleaning manufactured paving stones

  • The manufactured paving stones are highly used in creating a patio because they will require very little maintenance.
  • To clean the patio, use a garden hose with an attached nozzle. Flush the patio surface to drive away any debris on the surface.

Categories
News

How Supply Chain Issues Are Impacting The Landscape Industry?

How Supply Chain Issues Are Impacting The Landscape Industry?

Supply chain challenges have affected many businesses in the market today, and the landscape industry has not been left behind. Some of the major aspects of the landscape industry that have been impacted due to supply chain issues include raw material supplies as a result of trucks delays which in return leads to increased cost of items.

What Are the Major Causes of Supply Chain Issues?

There are some major factors in the industry today that have caused collaborative challenges in the supply chain in the landscape sector. These primary issues include the emergence of the COVID pandemic, increased consumer demand for outdoor commodities, shortage of manpower, and transport and logistic issues.

When it comes to the plant materials, the great 2008 recession plays a very major role in its shortage. During that period, many nurseries reduced or stopped their production to a very big extent. This is because these nurseries did not have enough funds to risk the investment of planting more. Since many trees take between 10 to 12 years to mature, the impact of that great recession is what we are experiencing today.

The emergency of the COVID pandemic forced many people to stay in their homes. This increased the demand for fast-produced plant substances, which has also contributed to the shortages we are experiencing today.

Extreme weather disasters have also hampered plant supply in places such as Texas and Louisiana while raising demand as individuals try to replace plants destroyed in the catastrophes.

Another cause of shortages is that most manufacturers have embraced the Toyota ‘Just In Time’ manufacturing method; parts are shipped to plants as requested, eliminating the need to store them. What began as a strategy to keep flexibility while decreasing costs have become routine in production, resulting in devastating shortage in trucks. Landscapers have battled to secure the trucks they need for their operations due to a lack of computer chips required for vehicles.

What Are Responses to the Shortage?

Even if no one had predicted the emergence of the COVID pandemic, many landscapers and players in the industry have come up with appropriate ways to respond to the shortages.

Many companies learned that “Just in Time” production might not serve all the customers based on demand. The institutions started to create their inventory ahead of the demand to not run short of supply when the demand starts to rise.

The landscape industry has also come up with alternative and substitute plant materials for their customers. Appropriate customer education to customers will help them stop fixing their minds on just one particular plant hence reducing the shortage.

The industry players are forced to limit the clients’ purchases to a certain amount. This especially happens when the demand spikes too high compared to the supply of that particular commodity.

How to Adapt and Overcome?

Considering ever-changing shortages, delayed deliveries, labor issues, and a rising pile of work, landscape experts are still stepping on their feet to discover innovative ways to ensure the industry is still running.

Customers are being educated on the current shortages and encouraged to do temporary planting and replace the trees in later times when the supply comes back to normal.

The landscape companies have started to adjust the prices to counter the rising cost of commodities.

Many companies have adopted paying premiums to get vehicles from dealers within ten weeks to handle the truck shortage. 

Another option that has been adopted is renting trucks and equipment.

What will happen in the Future?

Shade trees and evergreens will remain scarce for the next year or two. On the other hand, Perennials and shrubs will most likely be more readily accessible from next spring or summer. 

Because larger plant material requires time to grow, they will continue to be scarce.

Unfortunately, present inflationary tendencies such as labor shortages, salary raises, and input materials inflation is likely to persist.

Categories
News

How Much Is My Paver Patio Really Going to Cost?

How Much Is My Paver Patio Really Going to Cost?

Are you worried about how much your paver patio is going to cost? In many instances, almost any shopper will ask a similar question during the first few minutes of engagements about the outdoor living options. We’ve responded to this issue so many times, but nowadays, potential patio buyers are requesting the estimated or quoted prices of the paver patio.

The final cost of a paver patio is mostly determined by the material used, the patio’s size, and manpower. Here are all of the factors associated with paver patios’ costs that you should know.

What Are Factors that Play in Calculating Paver Patio Cost?

If the only aspect determining expenses was the size of your paver patio project, it would be simple to design. However, there are other additional things to consider, such as the location, design, and type of paver material.

A square concrete patio, for example, will be far less expensive than a curved stone paver patio. Let’s take a closer look at how various factors influence the final cost.

Material

When you think of paver patio materials, bricks will be all that you are thinking about most of the time. However, you need to understand that there are so many material types that can be considered for this design. Worth noting is that some materials will be more costly than others.

Natural stone pavers typically cost somewhere around $6 and $14 per square foot, with the overall installation cost of a stone patio ranging from $2,500 to $25,000.

Labor

Labor accounts for a substantial chunk of the budget of paver patio installation, and the price varies based on region, expertise, and complexities.

Location

If you use paving stones that are not locally available, you will incur some transportation expenses. Labor costs also vary based on the location; professionals in urban areas will charge more due to higher overhead costs.

Shape and Design

Most paver installations involve basic paver designs and shapes. However, expect labor expenses to grow if you want your pavers to imitate a unique design, such as mosaics or spirals.

The purpose of the paver patio

Do you want to have your paver patio around your swimming pool? Are you planning for a paver patio that will have the capacity to withstand heavy-weight vehicles? All these will affect the kind of material you will go for, ultimately affecting the paver patio’s overall cost.

Price Matters

The style of outdoor living space you get and any patio alternatives and accessories are often determined by the price. You must create an initial budget and plan for any long-term administration expenditures, which is true for any patio, regardless of size or layout.

In 2022, most paver patios will cost $7,500 to $12,000 to construct (average size 14′ x 20′).

This pricing strategy can rise depending on your house renovation plans, such as adding extra features and decorative elements, like water features, natural stone landscape, multiple accessories, etc.

Conclusion

Interesting in understanding the cost for your paver patio? You can get in touch with our team to enlighten you on the 2022 paver patio price estimates based on the real-world equipment and installation prices.  Get in Touch With US

Categories
News

Benefits Of Have A Backyard Firepit!

Benefits Of Having A Backyard Firepit!

 A fire pit provides the perfect focus for your backyard, and creates a warm and cozy atmosphere. May use many fuels ranging from portable propane to the latest virtual smokeless wood-burning but with a different budget.

Have you ever sat on a fantastic evening in your backyard and wanted to relax but were forced inside because it was too cold. Then, imagine there’s a glowing fireplace right in your backyard; you sit next to it, you can feel the warmth on your body. As the flames create their hypnotic effect on you, your mind and body begin to relax.

With a backyard firepit, you could confidently gather with family and friends fascinated by the flames’ atmosphere under a starry sky with happiness and comfort. Well, perhaps now is the time to gift your family a fireplace in the backyard to token for the year. You and the whole family will benefit from it as they are:

  • They provide gorgeous warm, 
  • Inspire conversations and meetings.
  • Provide security and Glare.

Why not capture the magical fire atmosphere? Why not add your backyard with a firepit? Here are the ten best advantages of a fireplace in your backyard

A Firepit offers year-round fun.

Some people mistakenly assume a fireplace is a seasonal amenity only enjoyed on mild spring and summer evenings. But they are wrong; the firepit is just like sitting whirlpool while snowing outside.

You could throw your friends and your family into an outdoor party, Light the yard, hold the bugs down and play some songs. You’re going to have a magical night.

Warm and welcome to your outdoor lounge area. 

Whether you, your family, or your friends like the fireplace backyard or the patio as a unique attraction. Introduce it into your home to encourage relaxation and relieve tensions experienced throughout the day. 

It is human nature to see a fireplace and sit beside it.

The warmest and most inviting asset on your property can be a fireplace, be it fixed or mobile, on your patio, in your yard, or another outside area. Whether you host a party, schedule a date, or meditate alone, a fireplace provides the right atmosphere.

As A Social Hot Spot 

In terms of atmosphere, nothing promotes a social meeting or a long, profound conversation like an open fireplace.

A fireplace provides the perfect base to sets the right mood.

Turn the night into a star-sighted extravagance. And enjoy your night.

A firepit Promote Friendly Conversation.

The great thing about fireplaces is how well they fit with any backyard. The calming effect of fire can also bring people closer to it and help people open up a friendly conversation and a sense of belonging.

Create a lovely outdoor centerpiece.

An outdoor fireplace is for almost any type of backyard, whether a postage-stamped space or a football pitch-size garden, making it easy for most consumers to choose.

Just avoid uncontrollable fire; portable propane fire pits are safer, more accessible to light, and mobile, but keep an eye on the propane level so that the fire does not go off unannounced. It is a better modern option. 

Structure and Construction

There are endless ways of building a fireplace. You can use:

  • A clean-cut fireplace patio, 
  • Straight-edged stones, 
  • Or a simple cast-iron or steel fireplace for a more modern look.

Alternatively, you can build your outside fireplace out of old brick and stone rocks in a yard or a sandpit.

Some people design the entire courtyard and patio around their fireplace, making it their natural outdoor attraction.

Whatever you want, central, modern, traditional, or rustic, there’s an option for everybody.

A Firepit provides Glare in dark places.

Even if the primary purpose was to generate heat, which is true, however, fire pits also create glare, an outdoor and indoor necessity for all parties.

If everything goes smoothly and your guests stay long after the sun falls, you do not want people to fall over patio furniture and hurt themselves or others. A fireplace provides ambient and unique light, brightens the entertaining outdoors, and lights up the darkness.

Provide a romantic atmosphere

While a fireplace is great for social events, it is also suitable for romantic occasions. A fireplace sets the mood for meaningful talks.

There can be no better place for a romantic debate; watching hypnotic flames can be enthralling, yet intimately suggestive, where you can get connected with your spouse.

Used for cooking

Your fireplaces are great places to cook food! Appetizers, main courses, desserts, you name it. You’ll need a grill plus some cooking utensils for comfortability.

However, thinking outside the box gives you a tremendous opportunity to eat thoughtfully. You can almost cook anything like grill grates, pots, pans, tinfoil, and sticks if you have the suitable equipment through firepit culinary skills. 

Super safe when using

Natural gas and propane-fed fireplaces are unbelievably safe. Without misusing it, fire pits may be dangerous, but the risks are low. Preventive measures and security must always be at the top of the list.

The main objective of any fireplace owner is to use it responsibly to ensure that, night after night, it is safe for family and their guests.  

Add value to your home? 

A well-built fire pit has become a good value for your home, but research suggests that you get an excellent return on your money from a well-built patio and firepit for about $6,000 if you decide to sell your house in the future. Why? Because potential homeowners like you like the idea of a fireplace! 

But they enjoy firepit they didn’t have to buy, build, or install.

It might even be the decisive factor in buying your home.

Affordable by everyone

Fire pits come in so many different forms, sizes, and materials; firepits have cost $6000 or more, inclusive of a courtyard. You have to make it in your specification, depending, on how you want it to look and whether you build and install it yourself.

Finally, if you want an elegance and awe firepit, you can create a whole entertainment area with intricate stonework, professional architecture, and a unique design is available for you between $5,000 upward.

Categories
News

Difference Between Pavers and Stamped Concrete

Difference Between Pavers and Stamped Concrete

Concrete and pavers are the two most common options for a driveway, pool deck, patio, and garden landscaping. You need to identify and decide which one offers the best return on investment for home hardscapes and landscapes. 

This decision between concrete and pavers is mostly a choice of personal preferences. However, the following advice will assist you in making un-regrettable decision:

Concrete or pavers?

Stamped concrete is wet concrete mixes that are poured on-site left to form a single slab; while pavers are thin, flat stones designed for use in paving projects such as walkways, patios, and driveways, both are also available in a wide range of shapes, sizes, colors, and patterns. 

Are you a homeowner looking for a style upgrade who could choose paver or stamped concrete. Concrete is delivered wet while paver molds are ready to be installed. Pavers are simple pieces that can make a single space because they come in many colors and patterns, with aesthetical appeals, 

Concrete types and their costs

As you have decided to use concrete for your patio or pool deck. It would help if you had time to understand and evaluate the type to use for your project. Two of the most common types of concrete used for outdoor projects are present.

A concrete slab, also known as poured cement, is sprayed onto your entrance, deck, patio, or other surface. It is about 4 inches thick, which makes it undoubtfully durable. Concrete sheets are a popular choice for low-cost materials with minimal maintenance.

Stamped concrete is applied in the same manner as plate concrete but finished differently. Stamped concrete is finished with a textured appearance. The finished product of stamped concrete can look like wood or flagstone, making it a better choice, but it is worth considering when expanding your design.

Pavers and their costs types

For outdoor design projects, pavers or paving stones will always be a popular choice. Pavers are characterized by their ability to create unique layouts. The most popular types of pavers on the market are here.

Stone Pavers

Popular choices for decks and patios are individual tiles that can arrange to make the surface uniform. They’re famously priced between ($14 to $27 per square foot) with a wide range of design options.

Installation

Pavers are a popular choice for DIYers because they are easy to install and don’t need an expert. However, they are more expensive ($8 to $15 a square foot) because they interlock and produce a more structured look than traditional pavers.

Other Paving Stone Types

There are numerous other paving stones. These include pavers of :

  • brick, 
  • clay, 
  • travertine, 
  • flagstone,
  •  cobblestone, 
  • bluestone, 
  • percent, and marble. Prices vary considerably depending on the selected stone.

Pavers versus concrete: What’s more appealing?

Now that you know the fundamental differences between pavers and concrete, it is time to compare them to help you make a good decision. Let’s start with what they look like:

Suitable for surfaces: Concrete

Although durable and affordable, concrete is not known for its beautiful appearance—poured in its coloring as uniform and gray.

Best for Texture: Concrete stamped

While stamped concrete is gray when poured, it is finished to provide texture; color options remain here on the limited side. You won’t have as many styles with concrete, but it is the most comparable option for pavers.

Color Appeal: Paver

Pave are of various colors and could blend with different building or environment colors. 

Most Awesome: Pavers

For designers, this is a material of choice. Pavers come in various colors and shapes and can be arranged as you want, creating a genuinely unique and personalized feeling in a room.

Most sustainable: Pavers

concrete is long-lasting, but pavers can take up to four times the weight of the concrete.

Most resistance to slip: pavers

While concrete can be treated to make it more slip-resistant with different products, pavers naturally already have more texture and help prevent slippage.

Though concrete can be treated to make it more slip-resistant with different products, pavers naturally have more texture that helps prevent slippage.

Pavers And Concrete: 

Now, between the two, Which one is better? Pavers or concrete? Whether paver or stamped concrete, they are designed to withstand outdoor conditions. But how do they stand up in extreme conditions over time?

Best in extreme temperatures.

Heat and cold can be handled by pavers, depending on the material you use. In colder climates, slate is a popular choice.

However, concrete is awarded as it can easily stand freezing times with the perfect adaptability.

Patio Best Choice Overall: Pavers

While both options have advantages and disadvantages, your patio will see the most foot action in your open-air areas. Pavers are designed to handle more foot traffic than concrete, which can finally crack with time and overuse, although durable.

Best Driveway Choice Overall:

When evaluating the material suitable for your driveway may be a bit tricky. While both are best for this purpose, asphalt is better rated. Asphalt is intended for extreme heat and extreme cold and is expected to last about 20 years.Costing between $10,000-$20,000. Asphalt drives cost $1,200-$2,800 

Are you ready for an exterior upgrade? Either paver, stamped concrete, or asphalt, we got you covered. Get a quote now.

Categories
News

Welcome on LCG Construction Blog !!!

This is a best test of your blog. This is Fantastic!